|
The Homogenizer of our company is used 3 horizontal, piston plug via crank shaft to be driven and the raw material be sucked in.After the raw material go through the 6 sets non-return valve, use 150-200 BAR pressure sending through one set two stages homogenizing valve and be exhausted by the discharge.
All parts contact with raw material are made from stainless steel. The anti-wear parts are special stainless steel with heat treatment.
All stainless steel material of homogenizer are resistance against CIP acid and caustic cleaning, no corrosion.
The first stage of homogenizing valve is closing type concentric ring for the better efficiency of homogenizing.
Pressure adjusting of the homogenizing valve is used manual control, with sanitary diaphragm manometer.
Anti-shock oil inside the manometer to extend the use life.
All real and gasket contact with raw material all acid; caustic and heat resistant also meet the requirement of good sanitary.
Crank shaft box inside the machine, use lubricant for lubrication and cooling, also have oil sight-glass, oil refill and exhaust hale.
The motor is placed on the top of hank shaft box; to reduce the height of homogenizing head, for easy to maintenance, also increase the suction capacity.
Transmission by the oil belt, no use of gear, to reduce the noise and vibration.
With electric current amp meter, to displace the power current consumption.
All cover with stainless steel plate. |
